| Characteristic | Unit | value | Test Method |
|---|---|---|---|
| Specific Gravity @ 25/25 | ℃ | 1.01-1.06 | ASTM D-70 |
| Penetration @ 25 ℃ | ℃ | 40-50 | ASTM D-5 |
| Softening Point | ℃ | 52-60 | ASTM D-36 |
| Ductility @ 25 ℃ | ℃ | 100 | ASTM D-113 |
| Loss On Heating | %wt | 0.2 max | ASTM D-6 |
| Drop In Penetration After Heating % | — | 20 max | ASTM D-6 & D-5 |
| Flash Point | ℃ | 250 min | ASTM D-92 |
| Solubility In CS2 | %wt | 99.5 min | ASTM D-4 |
| Spot Test | ℃ | negative | * A.A.S.H.O.T.102 |
BITUMEN
| Characteristic | Unit | value | Test Method |
|---|---|---|---|
| Specific Gravity @ 25/25 | ℃ | 1.01-1.06 | ASTM D-70 |
| Penetration @ 25 ℃ | ℃ | 60-70 | ASTM D-5 |
| Softening Point | ℃ | 49-56 | ASTM D-36 |
| Ductility @ 25 ℃ | ℃ | 100 min | ASTM D-113 |
| Loss On Heating | %wt | 0.2 max | ASTM D-6 |
| Drop In Penetration After Heating % | — | 20 max | ASTM D-6 & D-5 |
| Flash Point | ℃ | 250 min | ASTM D-92 |
| Solubility In CS2 | %wt | 99.5 min | ASTM D-4 |
| Spot Test | ℃ | negative | * A.A.S.H.O.T.102 |
| Characteristic | Unit | value | Test Method |
|---|---|---|---|
| Specific Gravity @ 25/25 | ℃ | 1.01-1.05 | ASTM D-70 |
| Penetration @ 25 ℃ | ℃ | 85-100 | ASTM D-5 |
| Softening Point | ℃ | 45-52 | ASTM D-36 |
| Ductility @ 25 ℃ | ℃ | 100 min | ASTM D-113 |
| Loss On Heating | %wt | 0.5 max | ASTM D-6 |
| Drop In Penetration After Heating % | — | 20 max | ASTM D-6 & D-5 |
| Flash Point | ℃ | 250 min | ASTM D-92 |
| Solubility In CS2 | %wt | 99.5 min | ASTM D-4 |
| Organic Matter Insoluble In CS2 | %wt | 0.2 max | ASTM D-4 |
| Spot Test | ℃ | negative | * A.A.S.H.O.T.102 |
| Characteristic | Unit | value | Test Method |
|---|---|---|---|
| Absolute Viscosity @ 60 | ℃ | 2400 min | ASTM D-2171 |
| Kinematic Viscosity @ 135 ℃ | ℃ | 350 min | ASTM D-2170 |
| Penetration @ 25 ℃ | ℃ | 50-70 | ASTM D-5 |
| Softening Point | ℃ | 47 min | ASTM D-36 |
| Solubility In trichloroethylene | %wt | 99 min | ASTM D-2040 |
| Ductility @ 25 ℃ after RTFOT | ?C | 40 min | ASTM D-113 |
| Flash Point | %wt | 220 min | ASTM D-92 |
| Characteristic | Unit | value | Test Method |
|---|---|---|---|
| Kin.Vis @ 60 | cst | 500-250 | ASTM D-2170 |
| Flash Point | C | 66 min | ASTM D-3143 |
| Water Content | %vol | 0.2 max | ASTM D-95 |
| Distillate To 360 | %vol | ASTM D-402 | |
| 225 | 10 max | ||
| 260 | 55-15 | ||
| 315 | 87-60 | ||
| Residue From Distillation To 360 | 67 min | ASTM D-402 | |
| Test on Residue Bitumen from Distillation : | |||
| Penetration @ 25 | C | 250-120 | ASTM D-5 |
| Ductility | C | 100 min | ASTM D-113 |
| Solubility In Trichloroethylene | %wt | 99 min | ASTM D-2042 |
PACKING:
PACKING: In Bulk and Steel Drams
Refineris: pasargad Oil, jey oil
For other types (different analysis) of BITUMEN, please send your request